Fitec International

Co-polymer 12 Plait

Co-polymer 12 plait provides high strength, light weight and excellent abrasion resistance in a single braid construction. Co-polymer Oledin 12 Plait is easily spliced using a standard tuck splice and is 40% stronger than three stand or 8 plait polypropylene. Its torque free braided construction provides easy handling and prevents kinks and hockles.

Specification chart below:

Size (Inches)		Lbs/100ft	Average Strength	Bulk Carton		600 ft Spool
Dia.	Circ.			Length	Approx Wt.	Approx Wt.
5/8 3/4 7/8 1 1-1/8 1-1/4 1-5/16 1-1/2 1-5/8 1-3/4 2 2-1/8 2-1/4 2-1/2 2-5/8 2-3/4 3 3-1/4 3-5/8 4	2 2-1/4 2-3/4 3 3-1/2 3-3/4 4 4-1/2 5 5-1/2 6 6-1/2 7 7-1/2 8 8-1/2 9 10 11 12	8.6 10.8 14.0 20.3 24.5 27.0 31.9 39.2 50.4 58.8 71.4 84.0 96.6 109 126 132 160 193 238 280	9800 12000 15600 20800 25800 28200 32800 39500 49800 57500 68900 80100 92000 102000 117000 128000 146000 174000 209000 243000	4800 3600 2400 1800 1200 1200 1200 600 600 600 600	412 389 336 365 294 324 383 235 302 353 428	85 112 169 211 247 275 330 427 509 592 720 846 960 1134 1248 1404 1638 2028 2412 2916

Specific Gravity	0.91
Melting point	279慚
Critical Temp	140慚
Coefficient of friction	0.16-0.18
Elongation at break	20%-25%
Fiber water absorption	0%-1%
UV resistance	Excellent
Wet abrasion	Very Good
Dry abrasion	Excellent

Floats
High Stretch
Excellent Abrasion Resistance
Torque Free
Easy Splicing
Excellent UV Resistance