Fitec International

Nylon 12 Plait

Nylon 12 Plait provides high strength, high elongation and excellent abrasion resistance in a single braid construction. Nylon 12 Plait is easily spliced using a standard tuck splice and is 25% stronger than three strand or 8 plait nylon. Its torque free braided construction provides easy handling and prevents kinks and hockles. Nylon 12 Plait comes standard with an overlay marine finish and is available on special order with a spliceable polyurethane finish in clear or any of six colors.

Specification chart below:

Size (Inches)		Lbs/100ft	Average Strength	Bulk Carton		600 ft Spool
Dia.	Circ.			Length	Approx Wt.	Approx Wt.
5/8 3/4 7/8 1 1-1/8 1-1/4 1-5/16 1-1/2 1-5/8 1-3/4 2 2-1/8 2-1/4 2-1/2 2-5/8 2-3/4 3 3-1/4 3-5/8 4	2 2-1/4 2-3/4 3 3-1/2 3-3/4 4 4-1/2 5 5-1/2 6 6-1/2 7 7-1/2 8 8-1/2 9 10 11 12	11 15 23 26 34 40 45 56 68 79 96 112 133 152 170 193 222 269 318 385	13900 18300 27800 32400 41500 47100 54400 69300 82700 96800 116000 135000 164000 183000 207000 238000 272000 316000 374000 452000	4800 3600 2400 2400 1800 1200 1200 600 600 600 600	528 540 552 624 612 480 540 336 408 474 576	66 90 138 156 204 240 270 336 408 474 576 672 798 912 1020 1158 1332 1614 1908 2310

Specific Gravity	1.14
Melting point	414慚
Critical Temp	300慚
Coefficient of friction	0.12-0.15
Elongation at break	30%-35%
Fiber water absorption	3%-5%
UV resistance	Good
Wet abrasion	Excellent
Dry abrasion	Excellent

High Stretch
High Strength
Excellent Shock Absorbtion
Soft Hand
Torque Free
Easy Splicing