Fitec International

Nylon Double Braid

Nylon Double Braid is the preferred choice for applications requiring high strength with excellent shock absorbing properties. Nylon Double Braid has good resistance to abrasion, sunlight, and chemicals. Due to its high elongation, nylon is almost always used in applications involving shock loading such as anchor lines and mooring lines. Nylon Double Braid comes standard with an overlay marine finish and is available on special order with a spliceable polyurethane finish in clear or any of six colors.

Specification chart below:

Size (Inches)		Lbs/100ft	Average Strength	Bulk Carton		600 ft Spool
Dia.	Circ.			Length	Approx Wt.	Approx Wt.
5/8 3/4 7/8 1 1-1/8 1-1/4 1-5/16 1-1/2 1-5/8 1-3/4 2 2-1/8 2-1/4 2-1/2 2-5/8 2-3/4 3 3-1/4 3-5/8 4 4-1/4	2 2-1/4 2-3/4 3 3-1/2 3-3/4 4 4-1/2 5 5-1/2 6 6-1/2 7 7-1/2 8 8-1/2 9 10 11 12 13	12 15 22 26 36 41 47 60 74 89 106 124 144 165 188 212 238 294 356 423 497	14800 19000 28300 33500 44900 52300 58800 74000 92400 110900 131500 152800 177000 201000 231000 254000 283000 319000 381000 447000 522000	4800 3600 2400 2400 1800 1200 1200 600 600 600 600	576 540 528 624 648 492 564 360 444 534 636	72 90 132 156 216 246 282 360 444 534 636 744 864 990 1128 1272 1428 1764 2136 2538 2982

Specific Gravity	1.14
Melting point	414慚
Critical Temp	300慚
Coefficient of friction	0.12-0.15
Elongation at break	30%-35%
Fiber water absorption	3%-5%
UV resistance	Good
Wet abrasion	Excellent
Dry abrasion	Excellent

High Stretch
High Strength
Excellent Shock Absorption
Soft Hand
Torque Free
Meets MIL-R-24050D